If sycl-ls does not list the expected devices within the system:

1. Check that there is a compatible version of the CUDA® or ROCm™ SDK installed on the system (for CUDA or HIP plugins respectively), as well as the compatible drivers.

2. Check that nvidia-smi or rocm-smi can correctly identify the devices.

3. Check that the plugins are correctly loaded. This can be done by setting the environment variable SYCL_PI_TRACE to 1 and running sycl-ls again. For example:

   SYCL_PI_TRACE=1 sycl-ls
   
   

   You should see output similar to the following:

   SYCL_PI_TRACE[basic]: Plugin found and successfully loaded: libpi_opencl.so [ PluginVersion: 11.15.1 ]
   SYCL_PI_TRACE[basic]: Plugin found and successfully loaded: libpi_level_zero.so [ PluginVersion: 11.15.1 ]
   SYCL_PI_TRACE[basic]: Plugin found and successfully loaded: libpi_cuda.so [ PluginVersion: 11.15.1 ]
   [ext_oneapi_cuda:gpu:0] NVIDIA CUDA BACKEND, NVIDIA A100-PCIE-40GB 0.0 [CUDA 11.7]
   
   

   If the plugin you’ve installed doesn’t show up in the sycl-ls output, you can run it again with SYCL_PI_TRACE this time set to -1 to see more details of the error:

   SYCL_PI_TRACE=-1 sycl-ls
   
   

   Within the output, which can be quite large, you may see errors like the following:

   SYCL_PI_TRACE[-1]: dlopen(/opt/intel/oneapi/compiler/2023.2.0/linux/lib/libpi_hip.so) failed with <libamdhip64.so.4: cannot open shared object file: No such file or directory>
   SYCL_PI_TRACE[all]: Check if plugin is present. Failed to load plugin: libpi_hip.so

   • The CUDA plugin requires libcuda.so and libcupti.so from the CUDA SDK.

   • The HIP plugin requires libamdhip64.so from ROCm.

   Double-check your CUDA or ROCm installation and make sure that the environment is set up properly i.e. LD_LIBRARY_PATH points to the correct locations to find the above libraries.

4. Check that there isn’t any device filtering environment variable set such as ONEAPI_DEVICE_SELECTOR (note that sycl-ls will warn if this one is set), or SYCL_DEVICE_ALLOWLIST.

5. Check permissions. On POSIX access to accelerator devices is typically gated on being a member of the proper groups. For example, on Ubuntu Linux GPU access may require membership of the video and render groups, but this can vary depending on your configuration.

When running SYCL™ applications targeting CUDA or HIP, under certain circumstances the application may fail and report an error about an invalid binary. For example, for CUDA it may report CUDA_ERROR_NO_BINARY_FOR_GPU.

This means that the SYCL device selected was provided with a binary for the incorrect architecture. In that scenario, check the following points:

1. Make sure your target is in -fsycl-targets and that the correct architecture matching the available hardware is specified with the flags:

   • Flags for CUDA: -Xsycl-target-backend=nvptx64-nvidia-cuda --cuda-gpu-arch=<arch>

   • Flags for HIP: -Xsycl-target-backend=amdgcn-amd-amdhsa --offload-arch=<arch>

2. Ensure that the correct SYCL device (matching the architecture that the application was built for) is selected at run-time. The environment variable SYCL_PI_TRACE=1 can be used to display more information on which device was selected, for example:

   SYCL_PI_TRACE[basic]: Plugin found and successfully loaded: libpi_opencl.so [ PluginVersion: 11.16.1 ]
   SYCL_PI_TRACE[basic]: Plugin found and successfully loaded: libpi_level_zero.so [ PluginVersion: 11.16.1 ]
   SYCL_PI_TRACE[basic]: Plugin found and successfully loaded: libpi_cuda.so [ PluginVersion: 11.16.1 ]
   SYCL_PI_TRACE[all]: Requested device_type: info::device_type::automatic
   SYCL_PI_TRACE[all]: Requested device_type: info::device_type::automatic
   SYCL_PI_TRACE[all]: Selected device: -> final score = 1500
   SYCL_PI_TRACE[all]:   platform: NVIDIA CUDA BACKEND
   SYCL_PI_TRACE[all]:   device: NVIDIA GeForce GTX 1050 Ti
   
   

3. If an incorrect device is selected, the environment variable ONEAPI_DEVICE_SELECTOR may be used to help the SYCL device selector pick the correct one - see the Environment Variables section of the Intel® oneAPI DPC++/C++ Compiler documentation.

Execution of code will hang for CUDA backend when group algorithms use double precision floating point numbers and:

• broadcast

• joint_exclusive_scan

• joint_inclusive_scan

• exclusive_scan_over_group

• inclusive_scan_over_group

are compiled with the icpx compiler. If you wish to use Group Algorithms then the DPC++ clang++ compiler driver must be used.

In some cases when building for spir and nvidia or amd targets the compiler will fail with an error as follows:

clang-offload-bundler: error: Opaque pointers are only supported in -opaque-pointers mode (Producer: 'Intel.oneAPI.DPCPP.Compiler_2023.2.0' Reader: 'Intel.oneAPI.DPCPP.Compiler_2023.2.0')

The workaround for this issue is usually to swap the order of the targets in the -fsycl-targets option.

For example the following command will fail:

$ icpx -fsycl -fsycl-targets=spir64,nvptx64-nvidia-cuda test.cpp -c -o test.o
clang-offload-bundler: error: Opaque pointers are only supported in -opaque-pointers mode (Producer: 'Intel.oneAPI.DPCPP.Compiler_2023.2.0' Reader: 'Intel.oneAPI.DPCPP.Compiler_2023.2.0')
icpx: error: clang-offload-bundler command failed with exit code 1 (use -v to see invocation)

But the following command will succeed:

$ icpx -fsycl -fsycl-targets=nvptx64-nvidia-cuda,spir64 test.cpp -c -o test.o

This is a bug in the compiler due to the fact that Nvidia and AMD targets have switched to opaque pointers but spir targets haven’t switched yet. This will be fixed in future versions of the compiler.

This may be caused by a number of things.

1. There is currently no support for std::complex in DPC++. Please use sycl::complex instead.

1. Some C++ standard library math functionality declared in <cmath> (such as std::cos, logf, sinf``) is not supported in kernel code for the AMDGPU backend of DPC++. Please use the equivalent sycl namespaced versions instead.

   See Install oneAPI for AMD GPUs (beta) for more information.